ss-custom-laser
Laser Cut Stainless Parts
Laser Cut Stainless Parts · Grade on request · Thickness 0.3–12 mm · Width ≤ 3000 mm · Surface on request
on requestGrade
0.3–12 mmThickness
≤ 3000 mmWidth
on requestFinish
Available specification
| Grade | Thickness | Width | Finish | Standard |
|---|---|---|---|---|
| on request | 0.3–12 mm | ≤ 3000 mm | on request | To drawing |
Ranges shown are standard availability; non-standard sizes can be made to order. Thickness is nominal — tolerance judged to ASTM A480 / EN 10088-2, tighter classes on request.
Supply and service
- EN 10204 3.1 mill test certificate with every shipment (heat number and chemistry).
- Decoiling, slitting, cutting and circle blanking available — supplied to drawing.
- FOB / CIF / CFR quoting; third-party inspection (SGS / BV / Intertek) before loading.
Need a quote or technical support?
Send the size, quantity and destination port — FOB / CIF quote within 24 hours.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Robotics — outer covers, mounting plates, guard brackets
- Automation — frame panels, rail mounting plates, fixture locating plates
- Kitchen and appliances — pierced panels, decorative parts
- Architecture — perforated screens, signage, shaped trims
Selection FAQ
- What tolerance does laser cutting hold?
- ±0.1 mm as standard; tighter on thin precision parts, looser on thick plate because of heat effects and kerf taper — assessed against your drawing.
- Why is stainless steel common for robot housings?
- It depends on the environment: cleanroom, food, medical and outdoor applications often use 304/316L because it withstands cleaning agents and moisture. For ordinary industrial settings, powder-coated cold rolled steel is more economical.
- Can you cut directly from drawings?
- Yes — DXF / DWG / PDF. Please state material, thickness, quantity and surface requirement when enquiring.