ss-custom-sheet
Custom Sheet Metal & Welded Structures
Custom Sheet Metal & Welded Structures · Grade on request · Thickness 0.5–12 mm · Width ≤ 3000 mm · Surface on request
on requestGrade
0.5–12 mmThickness
≤ 3000 mmWidth
on requestFinish
Available specification
| Grade | Thickness | Width | Finish | Standard |
|---|---|---|---|---|
| on request | 0.5–12 mm | ≤ 3000 mm | on request | To drawing |
Ranges shown are standard availability; non-standard sizes can be made to order. Thickness is nominal — tolerance judged to ASTM A480 / EN 10088-2, tighter classes on request.
Supply and service
- EN 10204 3.1 mill test certificate with every shipment (heat number and chemistry).
- Decoiling, slitting, cutting and circle blanking available — supplied to drawing.
- FOB / CIF / CFR quoting; third-party inspection (SGS / BV / Intertek) before loading.
Need a quote or technical support?
Send the size, quantity and destination port — FOB / CIF quote within 24 hours.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Machine frames — folded and welded bases, columns, beams
- Guarding — machine guards, safety fencing
- Tanks and boxes — control boxes, hoppers, sinks
- Conveying and storage — chutes, trays, tote bins
Selection FAQ
- Will it distort after welding?
- Yes — stainless has low thermal conductivity and high shrinkage. Balanced, staggered welding with fixtures is the usual approach; visible parts may need straightening or machining after welding.
- Is post-weld pickling needed?
- Recommended. Welding destroys the passive layer and leaves heat tint; pickling and passivation restores corrosion resistance, especially on 316L and duplex.