Lighting & Hardware Circles
Circles for lighting and hardware
Stainless circles for lighting and hardware · 304 · 0.3–2.0 mm · 2B/BA
1specsSpecs in stock
1gradesGrades available
0.3–2 mmThickness range
Specification and notes
- Grade: 304 · 304L · 316L · 321 · 201 · 430 · 409 · 2205 (on request)
- Finish: 2B · BA · No.1 · No.4 · HL · 8K · embossed (on request)
- Standard: ASTM A240 · EN 10088-2 · JIS G4304/4305 · GB/T 3280
- Packing: wooden / steel pallet, edge protector, PVC film (on request)
Ranges are typical; the contract and technical agreement govern.
Need a quote for lighting and hardware circles?
Send grade, thickness, width, quantity and destination port — FOB / CIF quote within 24 hours.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Lighting — downlight reflectors, lamp pans, housing bases
- Hardware — lock plates, hinge shims, decorative caps
- Appliance parts — heating plates, fan guards
Selection FAQ
- Will thin gauge crack when stamped?
- It depends on the draw ratio and the die. 0.3–0.5 mm 304 draws well for shallow parts; for deep drawing use 304 rather than 201.
- Can the discs be pre-polished?
- Yes on request, but polishing before stamping tends to leave die marks — normally the part is formed first, then polished.
Not sure which grade fits? Use the grade selector