Factory · Rolling Lines
Rolling Lines
12 modern rolling lines covering rebar, hot-rolled coil, plate, sections, and pipe.
Capabilities
The base has 12 modern rolling lines, including high-speed wire rod, bar, hot strip, plate, and section lines, covering all main specs from Φ5.5mm wire rod to 200mm thick plate.
Key lines are equipped with automatic gauge control (AGC) and shape control, and controlled rolling and cooling processes are used for high-strength steel and low-temperature toughness steel grades.
Key Metrics
12pcsRolling Lines
20010,000 tonsAnnual Capacity
1.5mmThinnest Coil Thickness
200mmHeaviest Plate
Capability Details
| Item | Description |
|---|---|
| High-Speed Wire Line | Produces Φ5.5 – Φ14mm high-speed wire and drawing wire, coil weight 1.5 – 2.5 t, suitable for drawing and welded mesh. |
| Rebar Line | Produces Φ12 – Φ40mm rebar, lengths 9m / 12m, cut to project length. |
| Hot Strip Line | Produces 1.5 – 25mm hot-rolled coil, width 1000 – 2000mm, with AGC and shape control. |
| Plate Line | Produces 6 – 200mm plate, optional UT level and Z-direction properties. |
| flat products Line | Produces plates (HW / HM / HN) and channels, angles, with drilling and beveling. |
FAQ
Thickness tolerances for 1.5–3.0mm specs follow standards, with tighter internal tolerances available on order to meet leveling and stamping needs.
Yes. Controlled rolling and cooling with composition design meets impact requirements at -20℃ or lower. Specify temperature and minimum absorbed energy at order.
Factory Strength: Other Sections
Need a quote or technical support?
Send product, material, specs, quantity and destination port for an FOB / CIF quote within 24 hours.